sWiFi/all
User Manual
15
Network Setting
Network Setup performs sWiFi/all settings related to network.
Lower-left cornet shows the information and status of the connected COMport.
[Load] button is a button that shows the information of the currently set sWiFi/all.
[Save] button is a button that saves the set content of sWiFi/all.
Once the settings have been change, please make sure to press the [Save] button and check that the changed
values have been applied in the actual equipment. You can check the [Load] button to re-connect and check the
set value again. If force terminate the program without saving the changes, the changed values are not saved.
[TIP]
The SSID for [Tip] Soft-AP can be changed in the Device Name area. Default Device Name(SSID) is "sWiFi_all".
We recommend changing the Device Name so that you can distinguish each device when using multiple sWifi/all
as Soft-AP.
*For detailed network setup information, please refer to Ch.4 Setup Utility section in the following Appendix.
