Chapter 5. Configuration via Web
5.4
Serial Settings
You can set the communication and operation environment for the serial port. After changing values,
you need to click
‘Submit’
button. Then you will see the same page with modified values. Please note
that you have to ‘
Save & Reboot
’ in order to see these changes in effect. Changes will be discarded if
you do not save current settings.
Figure 5-4 Serial settings page
Serial communication settings for Eddy-S1/Pin, S1/TTL, S2/Pin are as follows.
Table 5-4 Main features for Serial Settings
Menu
Default
Descriptions
Interface
RS232 or
RS422
▪
Eddy-S1/Pin, S1/DB9, S1/DB9-PoE
Only RS232 interface supported. Fixed. (Default: RS232)
▪
Eddy-S1/Pin-C, S1/DB9-C, S1/DB9-PoE-C
RS422 or RS485 interface is supported. By software, you can select
one of these interfaces. (Default: RS422)
▪
Eddy-CPU
User decides the serial interface, meaning Web or Telnet
configuration is not possible. For more information on interface
5-5
