SystemBase Eddy DK, Programmer'S Manual

Page: 62 / 147

Eddy DK Programmer Guide
62
2.6.2.2. Serial Port LED
Operation description
Pin Name Signal Name Descriotion
TxD Debug Port Tx LED
Debug Port
RxD Debug Port Rx LED
TxD COM Port1 Tx LED COM Port 1
(RS232)
RxD COM Port1 Rx LED
TxD COM Port2 Tx LED
COM Port 2
(RS232)
RxD COM Port2 Rx LED
TxD
If RS422 is COM Port3 Tx LED
If RS485 is Tx/Rx Common LED
COM Port 3
(RS422/RS485)
RxD
If RS422 is COM Port3 Rx LED
If RS485 is LED Off (Not Used)
TxD
If RS422 is COM Port4 Tx LED
If RS485 is Tx/Rx Common LED
COM Port 4
(RS422/RS485)
RxD
If RS422 is COM Port4 Rx LED
If RS485 is LED Off (Not Used)
2.6.2.3. GPIO LED
Eddy-S4M Provide max 34ea GPIO port.
No Pin Name Descriotion I/O
1 PC25
GPIO Only
I/O
2 PC24 GPIO Only I/O
3 PC20 GPIO or SPI1_NPCS3 I/O
4 PC19 GPIO or SPI1_NPCS2 I/O
5 PC18 GPIO or SPI1_NPCS1 I/O
6 PC17
GPIO Only
I/O
7 PC15 GPIO Only I/O
8 PC14 GPIO Only I/O
9 PC13
GPIO Only
I/O
10 PC12
GPIO Only
I/O
11 PC10 GPIO Only I/O
12 PC9
GPIO Only
I/O
13 PC5 GPIO or SPI1_NPCS1 I/O
14 PC3 GPIO or AD3 or SPI1_NPCS3 I/O
15 PC2 GPIO or AD2 or PCK0 I/O
16 PC1 GPIO or AD1 or PCK0 I/O
17 PC0 GPIO or AD0 I/O
18 PB31 GPIO or PCK1 I/O
19 PB30 GPIO or PCK0 I/O
20 PB21 GPIO or RF0 I/O
21 PB20 GPIO or RK0 I/O