background image

Page 11

English

Transport, Lifting and Positioning

TRANSPORT, LIFTING AND 

 POSITIONING

Refrigerators are supplied assembled (apart from 

standard antivibrating rubber supports, that will be 

installed on site). The equipment are full of refrig-

erant and oil, in the quantity required for a proper 

operation.

3.1 Inspection

When the unit is delivered, it is recommended to 

check it carefully and to identify any damage oc-

curred during transportation. The goods are shipped 

ex-factory, at the buyer’s risk. Check that the delivery 

includes all the components listed in the order.

In case of damage, note it down on the carrier’s de-

livery note and issue a claim according to the instruc-

tions provided in the delivery note.

In the presence of any serious damage, that does not 

affect the surface only, it is recommended to inform 

manufacturer

 immediately.

Please note that 

manufacturer

 may not be held liable 

for any damage to the equipment during transporta-

tion, even though the carrier has been appointed by 

the factory.

3.2 Lifting

The unit must be lifted by using the hooks inserted 

into the relevant eyebolts (see the figure).

It is recommended to use a spacer to prevent cables 

from damaging the unit (see the figure).

Before positioning the unit, make sure that the place 

of installation is appropriate and sturdy enough to 

hold the weight and to withstand the stress caused 

by the operation of the whole assembly.

Do not displace the unit on rollers, and do 

not lift it with a lift truck.

Unit must be lifted carefully.

To lift unit slowly and regularly.

To lift and displace the unit:

Q

Insert and secure eyebolts into the holes marked 

on the frame.

Q

Insert spacer between cables.

Q

Hook near the barycentre of the unit.

Q

The cables must be long enough to form, if ten-

sioned, an angle of at least 45° with respect to the 

horizontal plane.

WARNING

VLS-GB.indd 11

17-06-2009 15:56:43

Summary of Contents for VLC 1004





















































































Reviews: