_________________________________________________________________________________________________________
Topvex SX03, SX04, SX06
Installation description
Original
205871
2
Systemair
AB
Declaration of Conformity
Manufacturer
Systemair AB
Industrivägen 3
SE-73930 Skinnskatteberg SWEDEN
Office: +46 222 440 00 Fax: +46 222 440 99
www.systemair.com
hereby confirms that the following products:
Air handling units
Topvex SX03 HW
Topvex SX03 EL
Topvex SX04 HW
Topvex SX04 EL
Topvex SX06 HW
Topvex SX06 EL
(The declaration applies only to product in the condition it was delivered in and installed in the facility in
accordance with the included installation instructions. The insurance does not cover components that are
added or actions carried out subsequently on the product)
Comply with all applicable requirements in the following directives
Machinery Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
The following harmonized standards are applied in applicable parts:
EN ISO 12100-1
Safety of machinery – Basic concepts, general principles for design – Part 1: Basic
terminology,
methodology
EN ISO 12100-2
Safety of machinery – Basic concepts, general principles for design – Part 2: Technical
principles
EN 14121-1:2007
Safety of machinery – Risk assessment – Part 1: Principles
EN 13857
Safety of machinery – Safety distances to prevent hazard zones being reached by
upper or lower limbs
EN 60 335-1
Electric domestic products and similar – safety-general requirements
EN 60 335-2-40
Safety of household and similar electrical appliances - Part 2-40: Particular
requirements for electrical heat pumps, air-conditioners and dehumidifiers.
EN 50 106
Safety of household and similar appliances – Particular rules for routine tests referring
to appliances under the scope of EN 60 335-1 and EN 60967
EN 60 529
Degrees of protection provided by enclosures (IP code)
EN 61000-6-2
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for
industrial environments
EN 61000-6-3
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission
standards for residential, commercial and light-industrial environment.
The complete technical documentation is available.
Skinnskatteberg 11-02-2011
Mats Sándor
Technical Director
