Topvex Series
HWC - Hot Water Coil,
ELP - Electric Pre-Heater installation instructions
Systemair Inc.
16
3.3 Configuring the Software for EL Pre-Heater
After all the physical installations for pre-heating are complete the unit software needs to be setup using the
control panel.
Follow procedure below.
1 Access rights
Go to
Access Rights
by using the UP/DOWN
arrow buttons. Select by pressing the RIGhT arrow
button.
Temperature
Air Control
Time settings
→Access Rights
2 Log on
Choose
Log on
. Select by pressing the RIGhT
arrow button.
→Log on
Log off
Change password
3 Password
Enter password
1111
by pressing OK followed by
the UP/DOWN arrow buttons. Select next digit by
pressing the RIGhT arrow button. Press OK when
all 4 digits have been entered.
Go back 2 steps
using the LEFT arrow button.
Log on
Enter password xxxx
Actual level: None
4 Configuration menu
Go to
Configuration
by using the UP/DOWN
arrow buttons. Select by pressing the RIGhT arrow
button.
Man/auto
Settings
→
Configuration
Access Rights
3
Use the control panel to program the unit for electric
pre-heating. See chapter 3.3 on how to do software
configuration.
