Transport, storage
MRH 06.04.2017
7
4
Transport, storage
4.1
Transport
Each device leaves our plant in an electrically and mechanically proper condition. The devices are delivered in wooden
crates or on pallets. We recommend transporting the fans to the installation site in original packaging.
WARNING
Hazard of impact if the device falls down!
Load and unload the device carefully in order to avoid possible damage.
Pay attention to the weight and dimensions of the packaging. The weight of the device is visible from
the nameplate.
CAUTION
Danger from cutting edges!
Wear protective working gloves when unpacking.
Check the device for obvious defects, which can impair safe operation.
First of all, pay attention for defects on the connection cable, service switch and impeller, cracks in the housing,
missing rivets, screws or covering caps.
WARNING
Electrical hazard from damaged connection cable or connections
Do not use the connection cable, service switch or impeller for transport or hoisting.
WARNING
Hazard of impact if the device falls down!
Transport the device carefully and with appropriate hoisting device!
Wear a safety helmet and safety goggles!
Only put the device at unpacking on its base plate.
At manual transport observe allowed human lifting respectively carrying forces (see weight on the name plate).
Avoid impacts and distortion of the base plate and other parts of housing.
4.2
Storage
CAUTION
Hazard due to loss of function of the motor bearings!
Avoid storing for too long time (recommendation: max. 1 year).
Turn the impeller manually every three months, wear protective working gloves
.
Before installation, check proper function of the motor bearings
Store the device in the original packaging dustproof, dry and protected against weather.
Avoid effects of extreme heat or cold.
