499231
6
| IV-50 EC
4.2
Delivery
Each fan leaves Systemair in proper mechanical and electrical condition. The fan should remain in the original packaging until the final
delivery to the installation site.
4.2.1
Checking delivery
◊ Unpack the fan carefully.
◊ Only remove the packaging shortly before assembly.
◊ Wear protective equipment during all work in the vicinity of the fan, see 2.2 Personal protective equipment.
◊ Check the packaging and the fan for transport damage. Any findings should be noted on the cargo manifest.
◊ Check completeness of the delivery.
4.3
Transport
4.3.1
Safety information
◊
Never transport the fan by the connecting cables, terminal box, impeller, protection grill, or inlet cone.
◊
During open transport, please make sure that water cannot penetrate the fan housing.
◊
We recommend transporting the fan to the installation site in the original packaging.
◊
On the job site, you may remove the diagonal wood bracing to separate the single crates, keeping them protected to deliver to each
installation location.
◊ Load and unload the fan carefully.
◊ Use hoisting or lifting equipment that is suitable for the weight to be hoisted.
o Each crated IV50 EC unit is 260 Lbs. (118kg)
o Each IV50 EC unit out of the crate is 162 Lbs. (75 kg)
◊ Use the fan packaging exclusively as transport protection and not as a lifting aid.
4.4
Storage
Warning
Suspended loads.
◊ Wear protective equipment during all work in the vicinity of the fan, details see 2.2
Personal protective equipment
, page 5.
◊ Do not walk under suspended loads.
◊ Make sure that there is nobody under a suspended load.
Warning
When opening the transport packaging, there is a risk of damage
from sharp edges, nails, staples, splinters, etc.
Warning
Electrical or mechanical hazards due to fire, moisture, short circuit or
malfunction.
Caution
If transported without care during loading and unloading, the fan and
internal parts may be damaged.
Warning
Risk of injury to personnel and damage to the fan.
