background image

499231

Warranty    |         5

2.2  

  Personal protective equipment

◊ All personnel working with the fan must abide by the USA Code of Federal Regulations, Title 29: Labor, Part 1910—OCCUPATIONAL 

SAFETY AND HEALTH STANDARDS - Subpart I—Personal Protective Equipment.

2.3  

  5 rules of electrical safety

◊ Disconnect (disconnection of the electrical system from live components at all terminals)

◊ Prevent reactivation

◊ Test absence of voltage

◊ Ground and short-circuit

◊ Cover or restrict adjacent live parts

3  

  Warranty

For the assertion of warranty claims, the products must be correctly connected and operated and used in accordance with the 

datasheets. Further prerequisites are a completed maintenance plan with no gaps and a commissioning report. Systemair will require 

these in the case of a warranty claim. The commissioning report is a component at the end of this manual. The maintenance plan must 

be implemented by the installer or building operations team. See section 11.3 Maintenance for the maintenance plan.

4  

  Delivery, transport, storage

4.1  

  Safety information

◊ Prevent access by unauthorized persons by safety personnel or access protection.

2.1     

  Personnel

The fan may only be used by qualified, instructed and trained personnel. The persons must know the relevant safety directives in order 
to recognize and to avoid risks. The individual activities and qualifications can be found in Table 1 

Qualifications

, below.

Table 1 Qualifications

Activities

Qualifications

Storage, operation, transport, cleaning, disposal

Trained personnel

Electrical connection, commissioning, electrical disconnection 

Licensed Electrician 

Installation, disassembly

Licensed Riggers or a Certified Contractor

Maintenance

Licensed Electrician | Licensed contractor or matching qualification

Repair

Licensed Electrician | Licensed contractor or matching qualification

Note:

The operator is responsible for ensuring that personnel are instructed and have understood the contents of the operating 

instructions. If something is unclear, please contact Systemair or its representative.

i

Warning

Wear appropriatre protective equipment during all work in the 

vicinity of the fan, as dictated by local and national code.

Warning

Risk from rotating blades.

Summary of Contents for IV-50 EC





















Reviews: