1
TPI 16-05
The present technical conditions determine sizes, properties, scope of application and final manufac-
ture of regulating dampers manufactured by IMOS-Systemair spol. s.r.o. The specifications apply to
design, ordering, production, delivery, acceptance and use of these products as of January 1, 2005.
I. GENERAL
The
IMOS-RK
and
IMOS-RKT
regulating dampers are designed for the smooth control of the volume of airflow. The
IMOS-
RKT
tight damper is also designed for closing the airflow tightly but is not manufactured as gastight. Dampers are used in
ducts, air conditioning units as well as in mixing chambers of air conditioning devices. The
IMOS-RK
and
IMOS-RKT
dampers are designed to operate at temperatures ranging from -20 to 100°C and at pressure differential of up to 4,000
Pa and 80% humidity. The maximum airflow velocity is 20ms
-1
. The design of the
IMOS-RK
and
IMOS-RKT
enables their
installation to the opening in the wall or to the duct. It is possible to connect the damper to the flanges of width 20mm
(P20) and width 30 mm (P30).
The
IMOS - RK
and
IMOS - RKT
regulating dampers con-
sist of rectangular frame manufactured from horizontal 1
and vertical 2 channel frames between which the channel
blades 4 are situated. The channel blades 4 in the
IMOS-
RK
and
IMOS - RKT
dampers where the width is less than
1000mm form one field. In dampers where the width is
more than 1000 mm a vertical channel 3 is inserted in the
middle. It divides the damper blades 4 into two fields. The
blades 4 are set in opposed directions through a cogwheel
transmission. The channel blades 4 in the
IMOS - RK
damper are without sealing. The blades 4 in the
IMOS -
RKT
damper are interlockingly sealed by means of rubber
sealing. In the ends the blades are fitted with sealing
sheets 7 with self-adhesive seals. The blades 4 are
inserted into the channels 5 and 6. The adjusting and
arresting mechanism 8 provides adjustment and fixing of
channel blades 4 in selected position on the damper,
which is operated manually.
Construction Features
Fig.1 Main parts of IMOS-RK axb-R and IMOS-
RKT axb-R if a
>>
1000, b
≤≤
900
