There is no need for a connection profile at the ends of
the unit.
NOTE: The maximum distance between two connection
profiles is 960 mm. For greater distances connection
profiles should be installed on the operation side and
non-operation side.
Outdoor installation
For an outdoor installation, the connection profiles
supplied need to be cut to the correct length. These
profiles should be mounted over the entire unit length
and width.
Fig. 35 - Stacking, outside location
Bear in mind that different connection profiles are
used for the length and width directions of the cabinet.
•
Length direction: Cut the connection profile
supplied to the correct length and mount it as
described below.
Fig. 36 - Fixing profile, length direction, unit with
intermediate base frame
Cross section of length direction (A-A)
•
Width direction: Cut the supplied connection
profile to the correct length and mount it in the way
given below.
HHFlex Air Handling Units
| 11