background image

21

  Limited Warranty

•  The Heat recovery aluminum core 

has a Limited Lifetime Warranty.

•  The warranty is limited to 5 years on 

parts and 7 years on fans from the 
date of purchase, including parts 
replaced during this time period. If 
there is no proof of purchase 
available, the date associated with 
the serial number will be used for 
the beginning of the warranty period.

•  The fans found in all Fantech HRVs 

require no lubrication, and are 
factory balanced to prevent vibration 
and promote silent operation.

•  The limited warranty covers 

normal use. It does not apply to 
any defects, malfunctions or 
failures as a result of improper 
installation, abuse, mishandling, 
misapplication, fortuitous 
occurrence or any other 
circumstances outside Fantech’s 
control.

•  Inappropriate installation or  

maintenance may result in the 
cancellation of the warranty.

•  Any unauthorized work will result in  

the cancellation of the warranty.

•  Fantech is not responsible for any  

incidental or consequential 
damages incurred in the use of the 
ventilation system.

•  Fantech is not responsible for 

providing an authorized service 
centre near the purchaser or in 
the general area.

•  Fantech reserves the right to supply 

refurbished parts as replacements.

•  Transportation, removal and 

installation fees are the responsibility 
of the purchaser.

•  The purchaser is responsible to 

adhering to all codes in effect in his 
area.

*   This warranty is the exclusive and only warranty 

in effect relative to the ventilation system and all 
other warranties either expressed or implied are 
invalid.

HRV MAINTENANCE CHART

Maintenance Required

Recommended Frequency Date Maintenance Performed

Check and Clean Filters

Every 3 months or if 
dirty

Check Heat Recovery 
Core

Every 6 months

Check Drain Pan and 
Lines

Every 3 months

Vacuum the Inside of the 
Unit

Annually

Clean and Un-block 
Outside 
Hoods

Annually

Clean and Inspect Duct
Work

Annually

General Servicing by a
Qualified Contractor

Annually

* Schedule may be altered to meet your own needs. More frequent servicing may be required depending on the 
severity of your home's indoor and outdoor environments.

Contractor

Telephone Number

Date Serviced

Summary of Contents for FANTECH FLEX 100H

















































Reviews: