______________________________________________________________________________________________________
Essvent
Operation and maintenance instructions
200513
Systemair AB
10
GB
Manufacturer
Our products are manufactured in compliance with
applicable international standards and regulations.
Systemair AB
Industrivägen 3
SE-739 30
Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
The manufacturer hereby confirms that the following
products:
Kitchen cupboard fans
Essvent S and Essvent L
comply with the following EC-directives:
EC Declaration of Conformity
as defined by the EC Mach inery Directive 98/37/EC,
Annex II A, when connected to a cooker hood
approved by Systemair. Fans for ventilation in air
handling systems with air from non-explosion
hazardous premises.
This machinery must not be put
into operation until prior to reading mounting
instructions and safety information.
The following harmonized standards are in use:
EN 60 034-1 Rotating electric machinery; ratings
and performances.
EN 60 204-1
Safety of machinery; electrical equipment of
machines; general requirements.
EN ISO 12100-1
Safety of machinery - Basic concepts,
general principles for design -
Part 1: Basic term inology, methodology
EN 294
Safety of machinery; safety distances to prevent
danger zones reached by the upper limbs.
Remark:
EN 294 only complies when fitted contact safety
device is part of the extent of delivery.
EC Declaration of Conformity
as defined by the EC Low Voltage Directive
73/23/EC and 93/68/EC
The following harmonized standards are in use:
EN 60 204-1
Safety of machinery; electrical equipment of
machines; general requirements.
EN 60 034-5
Rotating electric machinery; part 5: Protection
classification for electric machinery.
EN 60 335-1 (valid for items marked with *)
Electric domestic products and similar – safety-
general requirements.
EN 60 335-2-80 (valid for items marked with *)
Electric domestic products and similar – safetygeneral
part 2: Special requirements regarding fans.
EN 50 106 Electric domestic products and similar-
Safety-Instructions for control of manufacture.
Remark: EN 50 106 complies for internally wired
products only.
EC Declaration of Conformity
as defined by EC’s EMC-directive 89/336/EC,
92/31/EC and 93/68/EC
The following harmonized standards are in use:
EN 61000-6-3: Electromagnetic compatibility -
Generic immunity-Emission –Part 1: General
requirements for equipment in homes, offices,
shops and similar environments.
EN 61000-6-2 Electromagnetic compatibility (EMC) –
Part 6-2: General requirements – Immunity for
appliances in industrial environments.
The complete technical documentation is available.
Skinnskatteberg, 26 June 2002
Mats Sándor
Technical Manager
