10
The system is now logged on at the Admin
level and unskilled persons could change
important parameters and settings to values
that will cause malfunction of the system.
Go to the start menu to return the system
immediatlely to the lowest access level –
Operator.
Digit to be changed flashes. Factory logged
password, exclusively for service partners.
The display
shows
1.
2.
3.
4.
8.
7.
9.
10.
The display is lit up
Access rights
Select - Log on
Return to start menu
Temperature
If the system is configured for cascaded
room temperature control, this menu
with max/min supply air temperature is
displayed.
Value to be changed flashes. Confirm se-
lected value with OK
Access rights
Select - Log off and select the answer – Yes
System returns to the start menu and is now
logged on at the Operator-level.
Select and confirm new set point temperature.
11.
12.
x 5
x 1
x 6
x 2
6.
x 6
Setting of min/max supply air temperature
x 2
x 2
x 2
5.
13.
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., Off)
Log on
Log off
Change password
Log off?
No
Actual level: Admin
Log on
Enter password ****
Actual level:
Operator
Actual level:
Admin
With Caskaded control
max/min supply air setp
Max: xx ˚C
Min: yy ˚C
Running mode
Temperature
Air control
Time settings
Manuel/Auto
Settings
Configuration
Access Rights
Access to this menu requires log on at the high-authority level – ”Admin”.
Follow the steps
below
