The system is now logged on at the Service
level and unskilled persons could change im-
portant parameters and settings to values that
will cause malfunction of the system. Go to the
start menu to return the system immediatlely
to the lowest access level – Operator.
Digit to be changed flashes (see page 2 as how
to enter numbers) – Factory logged password
is
1111
, and it works if it has not been chan-
ged by the user or service partner.
The display
shows
1.
2.
3.
4.
8.
7.
9.
10.
The display is lit up
Access rights
Select Log on
Return to start menu
Temperature
If the system is configured for cascaded room
temperature control, this menu with max/min
supply air temperature is displayed.
Value to be changed flashes. Confirm selected
value with OK.
Acess rights
Select - Log off and select the answer – Yes
System returns to the start menu and is now
logged on at the Operator-level.
Select and confirm new set point temperature.
11.
12.
x 5
x 1
x 6
x 2
6.
x 6
Setting of min/max supply air temperature
x 2
x 2
x 2
5.
13.
Follow the steps
below
Danvent DV TIME
2009-03-23 8:03
Syst:Stop
Danvent DV TIME
2009-03-23 8:03
Syst:Stop
Log on
Log off
Change password
Log on
Enter password ****
Actual level
Operator
Actual level:
Service
max/min supply air setp
Max: xx
˚
C
Min: xx
˚
C
Running mode
Temperature
Air control
Time settings
Manuel/Auto
Settings
Configuration
Access Rights
Access to this menu requires log on at the high-authority level – ”Service”.
9
➞
Summary of Contents for Danvent DV og TIME
Page 11: ...11 Notes...