SystemAir Danvent DV og TIME, User Manual, Page: 10 / 12

10
Digit to be changed flashes (see page 2 as how
to enter numbers) - Factory logged password
is
1111
, and it works if it has not been chan-
ged by the user or service partner.
The display
shows
1.
2.
3.
4.
8.
9.
13.
10.
11.
12.
The display is lit up
Access rights
Select log on
Return to start menu
Settings
Menus in settings
Select:
– Restore factory settings
– Restore user settings
Confirm with OK for selected alternative.
Value to be changed flashes.
To select menu
– Save user settings.
Value to be changed flashes.
Confirm selected value with OK.
Select and confirm new set point temperature.
The system is now logged on at the Service
level and unskilled persons could change im-
portant parameters and settings to values that
will cause malfunction of the system. Go to the
start menu to return the system immediatlely
to the lowest access level – Operator.
System returns to the start menu and is now
logged on at the Operator-level.
Select – Log off and select the answer – Yes
Access rights
14.
15.
16.
x 5
x 2
x 1
x 1
x 2
x 1
x 3
x 1
x 2
6.
7.
Restore Systemair factory settings or latest user parameters and settings
x 2
x 2
5.
Follow the steps
below
Danvent DV TIME
2009-03-23 8:03
Syst:Stop
Danvent DV TIME
2009-03-23 8:03
Syst:Stop
Log on
Log off
Change password
Log on
Enter password ****
Actual level
Operator
Actual level:
Service
Running mode
Temperature
..
Acces rights
Control temp
Control flow
Alarm settings
Restore factory settings: No
Restore user settings: No
Save user settings: No
Restore factory settings: No
Restore user settings: No
Save user settings: No
Access to this menu requires log on at the high-authority level – ”Service”.
➞