uClinux NEEK BSP
Debugging Kernel and User Applications
8.
Project types, executable, Hello world ANSI C Project, (or empty project
and add your source).Finish.
9.
Now, setup for nios2 tool chain in Eclipse IDE on the host by following
the steps below:
a)
Select the project
Helloworld
under
Project Explorer
.
b)
Right click on
Helloworld
and select
Properties
. Project properties
dialog box opens.
•
Select
Settings>GCC C Compiler
under
C/C++ build
. Make
following settings:
•
Command:
nios2-linux-uclibc-gcc
•
All options:
-O0 -g -Wall -c -fmessage-length=0
•
Click
Apply
.
•
Select
Settings>GCC C Linker
under
C/C++ build
and make
following settings
•
Command:
nios2-linux-uclibc-gcc
•
All Options:
-elf2flt
•
Select
Miscellaneous
under
GCC C Linker
•
Linker flags:
-elf2flt
•
Click
Apply
c)
Select
Run/Debug Settings
under Project properties. Run/Debug
settings dialog box opens
•
Click on
New
button. Select Configuration Type dialog box
opens
•
Select C/C++ Local application.
•
Click
OK
. Properties for new Configuration dialog box opens.
•
Under
Main
tab do the following settings:
•
Browse the
Helloworld
project under project.
•
Type
Debug/Helloworld.gdb
•
Select Debugger tab. Make following settings
•
Debugger:
gdbserver Debugger
•
Under
Main
tab of Debugger options make following settings
•
GDB Debugger:
nios2-linux-uclibc-gdb
•
Under
Connection
tab
•
Type:
TCP
•
Host name or IP address:
192.168.0.14
(
IP address of
NEEK board)
•
Port Number:
9999
(you can give any number)
•
Click
Apply
and click
OK
. You have finished setting of
run/debug settings.
•
Click
Apply
and click
OK
. This finishes project properties
settings.
d)
Select
Project>Build Configuration>Build>All
to build your project.
System Level Solutions
43
