background image

Notes:

- When make the connection, please refer to the connection diagram. Make sure that all the
units are switched off during any connection. The RCA sockets on your ST-250 are color coded
for your convenience. Red and white are RIGHT and LEFT audio respectively.
Use high quality RCA-interconnect and antenna cables for optimum performance and
reliability.

ABOUT THE ANTENNA

As it applies to all other radios, the sound quality depends on the signal strength of the antenna
inputs.
The position of the radio in relation to the transmitter thus directly influences the quality of the
signal received. For an optimal result it is therefore very important that you make sure that the
radio receives the best possible antenna signal.

The FM antenna must be adjusted for the best possible result.
A good tip is to let the antenna end point in a vertical direction
and fix it on a wall.

FM          ANTENNA          AM

For an optimal result it is recommended to install a FM antenna
on the roof or on the loft, or to connect it to a cable system.

FM          ANTENNA          AM

For receiving AM station an AM loop antenna must be installed.
Adjust the antenna for the best possible reception.

FM          ANTENNA          AM

CONNECTIONS

11

Summary of Contents for ST-250
















Reviews: