Systech Corporation RCS/5000, Hardware Manual

Page: 26 / 45

Adapting an RCS/6000 to an RCS/4000 or RCS/5000 Network 20
used as a standard hub port, equivalent to hub ports A, B, or C, if you use a cross-over patch
cable.
Figure 2-15: Network Configuration
Adapting an RCS/6000 to an RCS/4000 or RCS/5000 Network
If you are using your RCS/6000 to replace a Systech RCS/4000 or RCS/5000 port server or
including it in a network that already contains RCS/4000s or 5000s, you may want to use an
adapter on your RCS/6000 serial port that maps the RCS/6000 DB-9 connector to an RJ-45
connector emulating the RJ-45 serial ports. The adapter would allow you to use your existing
cables to connect to the RCS/6000. Figure 2-16 diagrams the pinouts for the adapter.