iNS Panel Connectors
8
iNS Panel Connectors
The following figure shows the connectors and LED locations for the iNS models. There are:
•
1 to 4 serial ports with DB9 and screw terminal connectors
•
1 or 4 RJ-45 Ethernet ports
A
B
C
D
A
C
D
B
RESET
STATUS
4
4
3
3
2
2
1
1
10/100Tx LAN
Figure 2-1: iNS Front Panel Connectors
The Status LED indicates the overall status of the device. The Port Status LEDs indicate the
status of each serial port. The LAN LED(s) indicate the status of the Ethernet connection(s).
For information on interpreting the LED color and pattern displays, see Troubleshooting.
The reset button can be used to reboot the unit or to restore the factory default configuration
on the unit. Depressing and releasing the button will reboot the unit.
Depressing and holding the "Reset" button in for about 5 seconds will restore the default
(factory) configuration to the unit and then reboot the unit.
