SYSONCHIP SOC2S03, User Manual, Page: 3 / 9

SYSON BLUETOOTH GPS User Manual v.1.0
Getting Started / PDA Connection Guide - Fujitsu-Siemens Pocket LOOX 600
03
PDA Connection Guide - Fujitsu-Siemens Pocket LOOX 600
04
[SOC2S03] SYSON BLUETOOTH GPS
2. Getting Started
2.1. Charge the battery
1) Before use SysOn TM Blueooth GPS Receiver, the battery
must be fully charged. Connect the power charger to the
power jack, then plug into an electrical outlet. As the device
is charging, the LED on the wall charger will show red
light and turn to yellow when it is fully charged. And also,
during charging, the battery status LED on the SysOn
TM
Blueooth GPS itself will show red light and turn off once
it is fully charged.
2.2. Turn on the GPS receiver
1) Turn on the SysOn TM Blueooth GPS Receiver using the
power switch. The Bluetooth LED (blue) will blink.
2) Once GPS position is fixed, the GPS status LED (orange)
will blink.
2.3. Connect to Bluetooth enabled PDA or computing devices
1) Perform Bluetooth device discovery from your Bluetooth-
enabled PDA or mobile computing devices. Refer to the
user guide manual of your Bluetooth enabled PDA or
devices for Bluetooth connection instructions.
2) After the connection is done between SysOn TM Blueooth
GPS and a Bluetooth-enabled device, the Bluetooth LED
(blue) will be on.
3. PDA Connection Guide - 01
1. Power on PDA
2. Turn on the Bluetooth on/off switch of the PDA
3. You will see PDA main screen 4. Tab "Start" and click "Pocket Plugfree" for Bluetooth connection
Bluetooth Switch
3.1. Connection with Fujitsu-Siemens Pocket LOOX 600