Sysmac Omron NX Series, Manual

Page: 52 / 66

7
．
EtherNet/IP Connection Procedure
49
3
The Edit Connection Dialog
Box is displayed.
Set the values (listed in the
following table) in the
Connection I/O Type ,
Originator Device and Target
Device Fields.
Click Regist .
■Ed
iting settings for connections
Setting item Setting value
Connection I/O Type Exclusive Owner with IO-Link I/O +
Events
Originator Device Input Tag Set EIP002_IN - [206 Byte]
Connection Type Point to Point connection
Output Tag Set EIP002_OUT - [62 Byte]
Connection Type Point to Point connection
Target Device Output Tag Set Input_100 - [206 Byte]
Input Tag Set Output_150 - [62 Byte]
4
The Edit Connection Dialog
Box is displayed again.
Click Close .
5
The Edit Device Parameters
Dialog Box is displayed.
Check that the connections set
for 192.168.250.2 are
registered.
Click OK .