7
．
EtherNet/IP Connection Procedure
39
9
The Target Device Dialog Box
is displayed.
Select
192.168.250.1
and
192.168.250.2
.
Click
OK
.
*If 192.168.250.1 and
192.168.250.2 are not
displayed in the dialog box,
click
Add
to add the
addresses.
*The displayed address varies
with the status of Network
Configurator.
10
The parameters of the
connected devices are
uploaded. After completing the
upload, the dialog box on the
right is displayed. Check the
contents and click
OK
.
11
Check that the nodes with the
following IP addresses are
configured in the Network
Configuration Pane.
- Controller (Node 1)
IP address: 192.168.250.1
- IO-Link Master (Node 2)
IP address: 192.168.250.2
12
Right-click IO-Link Master
(Node 2) and select
Parameter
–
Edit
.
Precautions for Correct Use
If you change the device parameter values of the IO-Link Master that are set in step 13, the
changed device parameter values cannot be reflected by transferring the tag data link
parameters to the Controller again unless you delete the already set connections and set
them as new ones again. When you have changed the device parameter values, you need to
delete the already set connections by referring to
[How to delete the connection settings]
in
Precautions for Correct Use
of
7.4.4. Setting Connections
and set the connections as new
ones again. After that, transfer the tag data link parameters to the Controller again to reflect
the changed device parameter values.
Summary of Contents for Omron NX Series
Page 65: ...62...
Page 66: ...2018 0818 0818 P702 E1 01...
