10
6.1.1 Enter the crease position from the keypad then press
to acknowledge
the input. The measurement is from the feeding edge to the creasing position. 32
position data can be processed in one pass once. Press
to delete input.
Press
and hold it for 3 seconds to clear all data in this group. After finishing
all settings, press
twice to get into standby mode then press
or
to start processing sheets.
6.2. Cover Hinge:
In the standby status, press
to access the setting menu.
Press
or
to choose "cover hinge" then press
.
6.2.1
Cover Hinge 1:
Summary of Contents for CP330B
Page 1: ...CP330B Auto Creaser Operation Manual Revision 18 10 21...
Page 2: ......
Page 24: ...22 touch each other Warning Be careful when opening the safety cover...
Page 27: ...25...
