1. Safety & Warning
1.1 Safety Rules
The machine has blade lock which make it a safe to operate. Regardless of
your experience, safety instructions must be read carefully, completely understood,
and applied to your daily work habits. If you do not understand or are confused by
certain safety instructions presented in this manual, discuss them with your supervisor.
Machine setup, cleanup, and maintenance operation will vary. Therefore, it is essential
for all users to practice safe work habits. SAFE WORK HABITS PREVENT INJURIES.
The main rule to follow is to ALWAYS make sure the blade is locked when performing
setup, cleanup, adjustment and maintenance operations. The safety precautions in
this manual provide guidelines for the protection and for that of fellow workers.
1.2 Precautions
Before any maintenance is performed on the machine, switch off all sources of
electrical; do not operate the equipment when locks are not in place. Failure to observe
this warning could result in personal injury.
1.3 Do’s And Don’ts
7. Do not allow horseplay in the work
area.
DO
DO NOT
1. Read and understand this manual before
attempting to operate or service the
machine.
1. Do not attempt to operate or service
the machine without reading and
understanding this manual.
2. Do not remove the safety devices.
2. Be familiar with the machine safety rules
and practices.
3. Warn others of an intended action that
may endanger them.
4. Perform lubrication and oiling of the
machine only when power is off.
5. Verify that all guards are installed before
operating the machine.
6. When working on electrical equipment,
power must be shut off to all circuits before
any work is attempted. Individual switches
must be opened and the equipment circuits
must be tested to make sure there is no
power.
7. Be sure all operators are aware of
all areas and operations that require
extra safety measures.
3. Do not clean or lubricate moving
parts of a machine that is running.
4. Do not let unauthorized persons to
operate the machinery.
5. Do not place tools on a machine
that is running.
6. Do not reach into the machine to
make adjustments while it is running.
Warning: do not reach beneath the blade and clamp!
1
Summary of Contents for 310M
Page 2: ......
