Troubleshooting and Maintenance
6
6.1 TROUBLESHOOTING
If problems occur, verify the installation of the camera with the instruction in this
manual and with other operating equipment.
Isolate the problem to the specific piece of equipment in the system and refer to
the equipment manual for further information.
11
NOTE 1 : You can choose BPS menu appropriate for keyboard protocol.
NOTE 2 : Although you change BAUD RATE or PROTOCOL menu,
the terms of change is not applied unless you select SAVE menu.
NOTE 3 : Does not do power source down while saving
<CAM SET MENU>
CAM ID
BAUD RATE
PROTOCOL
DISP MODE
DISP ITEM
TITLE
ALARM TEXT
SAVE
END
5.2.8 CAM SET
PROBLEM
POSSIBLE SOLUTION
Nothing appears on the screen
Are the power cord and line connection between the
camera and monitor made properly?
The image on the screen is dim.
Is the lens dirty?
If so, clean the lens with a soft, clean cloth.
CAM ID
Select the camera ID.(1~255)
BAUD RATE
Select serial communication speed. (2400/4200/9600/19200bps)
PROTOCOL
Select operating protocol.
(FASTRAX/PELCO P/PELCO D/COMMAND)
DISP MODE
Select display mode.(ON/OFF/PUSH ON)
DISP ITEM
Select display item.(1~2)
1
Camera Title and ID display.
2
Camera Title and ID, Zoom lens position display.
TITLE
Select camera title menu.(A~Z, 0~9)
ALARM TEXT
If the alarm is occurred, the ALARM TEXT established at this menu
will be displayed.
SAVE
Save preset parameters of CAM SET MENU.
