35
•
Pre-Viewer:
Motion detection windows are configured by Motion or Mask windows. Each
window can be selected by clicking with the mouse. It is also possible to
resize
,
delete
or
move
the window, by selecting the appropriate window at the mouse menu on the video
screen.
To create a motion or mask window, follow these steps:
1. Click the right button of mouse to see the mouse menu.
2. Select New Motion (or New Mask) from the mouse menu.
3. Click and drag mouse to designate a motion area.
•
Motion Detection Setting:
The behavior for each window is defined by adjusting the
Threshold and Sensitivity, as described below.
A motion index is a set of parameters describing Window Name, Type, Threshold and Dwell
Time. Window Types is one of Motion and Mask windows.
- Threshold:
Sets up the threshold for the motion detection.
- Dwell Time:
Sets the hold time an event lasts for the specified hold time from the point of
detection of a motion.
You can also modify or delete a motion index. Select an index and then, click the
Modify
or
Delete
button.
Select “Enable” to activate the motion window.
T
Network Loss
This is used to trigger the event every time the network connection fails. Select “Enable” to
activate the Network Loss event.
