Touch and hold ‘ ’ for 1sec
to change text options
A1
Registered
Touch and hold ‘ ’ button
for 1sec
1. Password Field
2.Enter Password 0000
3.Go to Settings
Tap ‘ ’ button 3 times
5. Bell Setting
5-1. Bell Registration
New bell registration and re-registration under different Bell ID.
Tap ‘ ’ button once
4.Select Bell Setting
5.Select Bell Registration
6.Enter the Bell ID
Tap ‘ ’ button once
Tap ‘ ’ button once more
to enter the ID
7.Create the Bell ID
*The function of buttons for creating the Bell ID
Function
Change 0 to 1~9
Number->Special characters -> Alphabet
Shift the cursor position
Choose the icon
Exit
Motion
Tap
Touch and hold 1sec
Tap
Tap after stop blinking
Tap
Button
8.Bell Registration
Press the bell once
(Press the bell once more to re-register.)
*If the bell is already registered, ’Re-registration’ message
will appear, press the bell once more to re-register.
*Repeat no.7 & 8 for bell registration.
*After bell registration, the Bell ID will be updated
automatically. (ex. A1->A2)
*You can create the Bell ID up to 10digits, but it will not display all depending on display type setting.
From Message Display, you can check all digits. (Refer to p14, 7-2.Display Type Setting)
0
0 0 0 0
Tap ‘ ’ button once
0 0 0 0
Press The Bell
A1
Up to 10digits
Press The Bell
0
Starts blinking
Bell Registration
-7-
Summary of Contents for Nttworks SB-700
Page 19: ......
