Page
2
of
20
V07.22
Welcome
Thank you for choosing our thermosiphon solar water heater from the TS-INOX range. The TS-INOX system is a
high quality product. The solar energy is transmitted through by an absorber with a highly selective coating. The
robustness of the system is ensured by the tempered safety glass pane, the enameling of the hot water tank and
the Magnelis® steel of the supports.
System
TS-202INOX
TS-304INOX
Type of system
Thermosiphon, direct circulation, without heat exchanger
Net volume
195 l
279 l
Weight empty
104 kg
150 kg
Weight of full system
299 kg
429 kg
Roof installation
Flat roof
Collectors
1x
C2000 D12c
2x
C2000 D12c
Type
Flat plate collector
Gross surface area
2.06 m²
4.12 m²
Type of absorber
Absorber made of selective aluminum laser welded on Cu tubes
with 8 harp tubes Ø12mm and two manifolds Ø22mm
Absorber coating
Highly selective coating (absorptance 95%, emittance 5%)
Dimensions
2033 x 1015 x 98 mm
2033 x 2076 x 98 mm
Net weight
31 kg
62 kg
Liquid content
2.13 l
4.26 l
Cover
Tempered structural glass, 3.2mm, transmission 91%.
Stagnation temperature
180°C
Tank
BHX200
BHX300
Tank type
Stainless steel 316L
Stainless steel 316L
Dimensions
1480 mm, Ø 550 mm
1975 mm, Ø 550 mm
Net weight
44 kg
55 kg
Heat transfer
Direct circuit, without heat exchanger
Insulation
50mm PU
Max. pressure
10 bar
Corrosion protection
INOX 316L
Cold Water inlet
¾
” M
Hot Water outlet
¾
” M
Hydraulic kit
Solar circuit fluid
Water
Water
Tube
Copper pipe, Ø 18mm
Copper pipe, Ø 18mm
Pipe mass
1,6 kg
1,8 kg
Max. pressure
10 bar
10 bar
Support
Material
Magnelis steel
Magnelis steel
Mass
29 kg
33 kg
Permissible load
Max. snow load (pressure) 3 kN/m², Max. wind speed 245 km/h
No
TS–INOX Thermosiphon Solar Water heater
