Syris SY120SA-V5EM, Operation Manual, Page: 10 / 16

SY120SA SINGLE DOOR CONTROLLER
- 9 -
Example
：
card password alter from 0000 to 5678
After proximity card then enter
０ ０ ０ ０
+
５ ６ ７ ８
+
５ ６ ７ ８
+ EN
The card password change from 0000 to 5678
【
group set up open door mode to password open door mode
】
Enter
【
NNNN
】
+
【
pppp
】
+
【
nnnn
】
+
【
nnnn
】
+ EN , the system will decide correct or
not, and will response correct status and modify the old password to new password.
NNNN
：
effective card number, 0001
～
2000
pppp
：
the orginal password or system preset password (default password is 0000)
nnnn
：
new password, enter twice to confirm.
Example
：
the password of card number 0001change from 5678 to 2468
Enter
０ ０ ０ １
+
５ ６ ７ ８
+
２ ４ ６ ８
+
２ ４ ６ ８
+ EN
The card passowrd change from 6578 to 2468
。
9. System default
9-1 Clear all setting and restore to default
(including card data, parameters, and I/O data…etc.)
Under login status, enter FUN +
４ ９
+ EN, it will response the correct status if correct;
then enter FUN +
４ ９
+ EN again and wait for ten seconds to clear all setting and restore
to default.
10. Steal Alarm System Function Setup
10-1 Steal Alarm system relief
【
withdraw
】
Enter FUN +
０
+ EN, the OK pilot lamp flash once, the warning light go out after
proximity card then burglarproof system complete relief.
10-2 Start Steal Alarm System
【
deploy
】
Enter FUN +
１
+ EN, the pilot lamp flash once, after proximty card the warning light
flashes, the burlgarproof system start operating complete.