3
II.
Turn ON and OFF the flight computer
It is important to know that compared to other displays, the one the SYS’Evolution is using does not
require any power to keep an image displayed. This is why when you received it, some information may
already be displayed on the screen!
1. To turn ON your flight computer, press the
START button once.
A small red light
turns-on in the eye of the eagle to
indicate that the instrument is ON.
The boot sequence lasts a few seconds to
initialize all the sensors. The "
GPS booster
"
is then activated to minimize the time of
reception of the GPS signal. As soon as the
reception is sufficient, the instrument will
automatically switch to the flight screen.
2. The instrument will be automatically turned
OFF after
20 minutes
of inactivity (no
ground speed nor vario). To manually turn it
OFF, press the START button during 2
seconds, until the display wipes out.
EN
V2.20
Instrument software version
(Also visible in the Info menu, see page 9)
