manualshive.com logo in svg

Synway SMG-C Series, User Manual, Page: 91 / 111

Share
Download
Synway SMG-C Series User Manual Download Page 91

                                                           

Synway Information Engineering Co., Ltd

 

SMG-C Series Analog Gateway User Manual (Version 1.7.1)       

                                 Page 86 

Server Address 

The address of the server to receive CDR. 

Server Port 

The port of the server to receive CDR. 

NTP 

Sets whether to enable the NTP time synchronization feature. It is required to fill in 

NTP Server Address

, 

Synchronizing Cycle

 and 

Time Zone

 in case NTP is 

enabled. By default, 

NTP

 is enabled. 

NTP Server Address 

Sets the Server address for NTP time synchronization. By default, the address is 

time.nist.gov 

Synchronizing Cycle 

Sets the cycle for NTP time synchronization, calculated by s, with the default value 

of 3600. 

Daily Restart 

Sets whether to restart the gateway regularly every day at the preset 

Restart Time

. 

By default, this feature is disabled. 

Restart Time 

Sets the time to restart the gateway regularly. 

System Time 

The system time. Check the checkbox before 

Modify 

and change the time in the 

edit box when NTP is disabled. 

Time Zone 

The time zone of the gateway. 

Summary of Contents for SMG-C Series
















































































































Reviews:

No comments