Synway Information Engineering Co., Ltd
2.1.3 Backboard
2.1.4 Module
The BRI16 full-length board can work with either of the two modules NT200 and TE200, or work
with both of them at the same time.
ls in TE mode, with S/T interface. By default, the module
TE200 is not set to 100
Ω
, but you can set the matching impedance to 100
Ω
manually. See
Figure 2-6 TE200
z
NT200 (NT dual-port module)
This module offers two BRI channels in
S/T interface. By default, the module
n set the matching impedance to 100
Ω
manually. Equipped
with the electric powersupply circuit, this module can provide 38V line feed to the S/T interface.
Figure 2-5 BP200 Backboard
z
TE200 (TE dual-port module)
This module offers two BRI channe
Figure 2-6 for its hardware structure.
36-pin Slot
HD Power Connector
NT mode, with
NT200 is not set to 100
Ω
, but you ca
You can choose whether to output the feed or not by setting the switch (PSW). By default the line
feed is not output. Refer to Figure 2-7 for its hardware structure.
Synway BRI16 Full-length Board Hardware Manual (Version 1.0)
Page 5
