Synway Information Engineering Co., Ltd
Figure 2-14
Insertion of Left Tip
2) Push the right tip of the spring steel buckle down into the oblique slot on the edge of the
backboard. See the figure below.
Figure 2-15 Insertion of Right Tip
3) After the spring steel buckle is installed properly, insert the motherboard (or
daughterboard) as shown in the figure below.
Figure 2-16 Insertion of Motherboard
4) Then push the spring steel buckle down into the little slot on the top edge of the
motherboard. Now the motherboard is well fastened.
Synway BRI16 Full-length Board Hardware Manual (Version 1.0)
Page 11
