Syntron Material Handling V-75-A, Service Instructions Manual

Page: 4 / 7

3
If the current draw of the vibrator is the maximum allowable current rating (see page 3) and the vibrator is
not meeting the required capacity, a change in the installation may be necessary.
MAXIMUM CURRENT RATINGS:
TROUBLE SHOOTING
16 Amps 115V-50/60Hz
8 Amps 230V-50/60Hz
4 Amps 460V-50/60Hz
10 Amps 115V-25Hz
5 Amps 230V-25Hz
3 Amps 460V-25Hz
Replace only with parts recommended, or supplied by SMH.
PARTS LIST – ELECTROMAGNETIC VIBRATOR MODEL: V-75-A
ITEM
DESCRIPTION QTY PART NO.
A
Armature Casting 1 C-57566-A
B Cap Screw, Hex Hd. (3/8”-16 x 2”) 4 H0310901
Lockwasher 3/8” 4 H0113201
Hex Nut (3/8”-16) 4 H0103001
C *Label (Disc. Electric.) 1 A-125694
D *Nameplate 1 A-61712
E Hex Jam Nut (7/8”-9) 8 H0106004
F Outside Spring Seat 4 A-14123
G Coil Spring 4 A-22237-A
H Inside Spring Seat 4 A-14010
J
●
Strain Relief Tubing 1 A-14078
K
●
Coil Cover (Cable Side) 1 C-14076-A
●
Cable Bushing 1 A-14083
●
Cap Screw Hex Soc. Hd. (3/8”-16 x 3/8”) 1 H0421400
●
Lockwasher (3/8”) 2 H0113201
●
Cap Screw, Hex Hd. (3/8”-16 x 1”) 2 H0310201
M Stud Assembly 2 B-192967-A
Elastic Stop Nut (5/8”-11) 2 H2100213
N Striking Plate Assembly 2 B-14169
P Core Assembly 1 C-58112
Core Insulating Sleeve (Not Shown) 1 B-14081
Q Cable Clamp 1 0198X002
Cap Screw, Hex Hd. (1/4”-20 x 3/4”) 1 H0301201
Plainwasher (1/4”) 1 H0116601
Lockwasher (1/4”) 1 H0112801
Hex Nut (1/4-20) 1 H0101601
R Coil & Cable Assembly (115V-50/60Hz) D-62396-C
Coil & Cable Assembly (230V-60Hz) 1 D-62396-D
Coil & Cable Assembly (460V-50/60Hz) Only D-62396-E
PROBLEM CAUSE CORRECTION
Vibrator Operates
Below Capacity Loose Hardware
Defective Magnet
Defective Springs Repair
Replace
Replace
Vibrator Does
Not Run Loose Connections
in Controller
Defective Rheostat Repair
Replace