1
Service Instructions
Syntron® Electromagnetic
Vibrator
Model : V-75-A
SMH reserves the right to alter at any time, without
notice and without liability or other obligations on its
part, materials, equipment specifications, and models.
SMH also reserves the right to discontinue the
manufacture of models, parts, and components
thereof..
Safety instruction: Products Safety Labels must remain highly visible on the equipment. Establish a
regular schedule to check visibility. Should safety labels require replacement, contact SMH for an
additional supply free of charge.
INTRODUCTION
The Model V-75-A is a solid impacting electro-magnetic vibrator designed to promote the free flow of bulk
materials through a straight-line vibratory action. This action is transmitted to the installation through the
vibrator base.
The vibrator is operated from a single-phase R-C power supply using a standard controller.
INSTALLATION
The vibrator may be installed in any position with the long axis on a vertical plane.
The base is provided with four 11/16” diameter mounting holes. Four mounting bolts must be used and the
bolts must be securely tightened. Check frequently to see that these bolts remain tight.
If rigid conduit is used between the controller and vibrator, provide at least 18” of flexible cable between the
vibrator and conduit.
The current supply must be the same as the rating designated on the nameplate.
Installation of the controller should be according to the controller instructions.
OPERATION
NOTE: If the vibrator is installed on a hopper, do not operate the vibrator while the hopper is closed. The
vibrating action will compact the contents of the hopper.
To start the vibrator, place the switch in the ”ON” position. The rheostat is used to control the force of the
vibration. Turning the control clockwise will increase the vibrator output and counterclockwise will decrease
the output. To stop the vibrator, place the switch in the ”OFF” position.
