Q119
Sequential Controller
Aug 2014
LED indicates
active stage.
Output Section
for 24-stage mode.
Glide speed.
ADD knob offsets the
output voltage
up or down.
Voltage output and
Gate output.
DONE OUTPUT
Short pulse
when cycle
finishes.
Start/Stop section.
Manual or from
gates signals.
GO runs sequencer as
long as button or signal
remains high (on).
Mode Control Section.
8-stage or 24-stage.
Output range contrl.
Cycle Once or Continuous.
Up or Up/Down motion.
SET END
Sets the last stage in
the sequence.
Oscillator Control Section.
Speed control and internal/
external selection.
Use square wave or gate.
Manual Stepping.
GATE WIDTH
Controls duty cycle of
All Gate Outputs.
Voltage and
Gate outputs for
3-row mode.
