Synthesizers.com Q106 Manual Download Page 3

 

Q106  

Oscillator

 

Jun 2014 

     Pulse Width Control Section 
     Pulse Width Control Connector  
          Allows external control of pulse width.  
     Pulse Width Level Control  
          Determines the amount of affect that the pulse width control voltage 
          has.  
     Pulse Width Control  
          Allows manual setting of pulse width.  
 
     Exponential Frequency Control Section 
     1V/Octave Connectors (2)  
          Allows external control of pitch with an exponential response (usually 
          from keyboards)  
     Adjustable Exponential Connector  
          Allows external control of pitch with an exponential response.  
     Exponential Frequency Level Control  
          Determines the amount of affect that the exponential control voltage 
          has upon pitch.  
 
     Output Section 
     Sine  
          Pure mellow sounding waveform with almost no harmonics. 
          Flute-like.  
     Triangle  
          Mellow sounding waveform with some harmonics.  
     Saw  
          Buzzy sounding waveform with many harmonics. Brass horn-like.  
     Ramp  
          Inverse of Saw. Sounds the same but useful for modulation.  
     Pulse  
          Hollow sounding waveform with many harmonics. Width can be 
          controlled. Woodwind-like.  

 
Waveforms 

 

Summary of Contents for Q106







Reviews: