6
Adjust the torque setting
Instrument
321.132
Torque Limiting Handle
Select the desired torque by adjusting the setting on the
Torque Limiting Handle. Grasp the knurled wheel on the
handle and pull it toward the working tip. Rotate the wheel
to the desired torque setting and release.
Note:
It is recommended to start at a lower torque setting;
the setting can be increased as needed.
7
Tension the cable
Attach the Torque Limiting Handle to the Tensioner/Crimper.
Apply tension by rotating the Torque Limiting Handle in
a clockwise direction until it slips. Remove the Torque
Limiting Handle.
Synthes Spine
13
