Synology DS-101j User Manual Download Page 5

Page: 5 / 123

Synology DS-101j

There are slots on the side covers for ventilation. To make sure Synology DS-101j

Disk Station is operating under normal condition, please do not block or cover

those slots to avoid its being overheat.

The operation temperature is from 50°F to 90°F (10°C to 35°C). Care must be

taken to allow sufficient air circulation or space between units.

The connections and equipment that supply power to Synology DS-101j Disk

Station should be capable of operating safely with the maximum power

requirements of DS-101j Disk Station. In case of a power overload, the supply

circuits and supply wiring should not become hazardous.

10.

The power cord must plug in to the right supply voltage, i.e. 110VAC for North

America and 230VAC for Europe. Make sure that the supplied AC voltage is

correct and stable.

11.

Do not allow anything to rest on the power cord and do not locate the product

where anyone can walk on the power cord.

12.

Do not service the product by yourself. Opening or removing covers can expose

you to dangerous high voltage points or other risks. Refer all service to qualified

service personnel.

Summary of Contents for DS-101j




























































































































Search results

Summary of Contents for DS-101j

Reviews:

Related manuals for DS-101j

Brands by name

Popular brands

Synology DS-101j, User Manual

Search results

Summary of Contents for DS-101j

Reviews:

Related manuals for DS-101j

Brands by name

Popular brands