Synology DS-101j User Manual Download Page 19

Page: 19 / 123

Synology DS-101j

•

Automatic file backup for Windows clients with installation of Synology

Data Replicator

•

Easy to use Web-based Synology management UI and user friendly Web-

based help

•

Network Time Protocol (NTP) Support

•

HDD sleep mode support High performance and high throughput for data

storage

Noise Free

With a fan-less design, the Synology DS-101j Disk Station provides users with a

quiet and noise-free office environment.

USB 2.0 Support

There are three USB 2.0 ports available to use. Simply plug in a USB disk to the

Synology DS-101j Disk Station and you can have the additional storage you need with no

system downtime. In additional, the external USB disk can be used as the data backup

device to the system.

Direct input from Digital Camera/Flash drives

It is easy to share your company's party video and photos with your colleagues.

Simply connect your digital video recorder to the Synology DS-101j Disk Station, press

the COPY button on the front panel, and your recorded video will be automatically

uploaded to a safe and shareable folder.

Summary of Contents for DS-101j




























































































































Search results

Summary of Contents for DS-101j

Reviews:

Related manuals for DS-101j

Brands by name

Popular brands

Synology DS-101j, User Manual

Search results

Summary of Contents for DS-101j

Reviews:

Related manuals for DS-101j

Brands by name

Popular brands