background image

 

 

SYNOLOGY, INC. 

LIMITED PRODUCT WARRANTY 

THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. 

AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP  AND SYNOLOGY UK LTD., (COLLECTIVELY, 

"SYNOLOGY").  YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE 

PACKAGE CONTAINING AND/OR USING THE PRODUCT.  IF YOU DO NOT AGREE TO THE TERMS OF THIS 

WARRANTY, DO NOT USE THE PRODUCT.  INSTEAD, YOU MAY RETURN THE PRODUCT TO THE RESELLER WHERE 

YOU PURCHASED IT FOR A REFUND IN ACCORDANCE WITH THE RESELLER'S APPLICABLE RETURN POLICY. 

Section 1.  Definitions.

  (a) New Product, including: (1) 

"Category I Product" means Synology product models 

RS810+, , and RX410  (2) "Category II Product" 

means Synology product models RS3411xs, RS3411RPxs, 

R, RS411, , RS409+, RS409, RS408-

RP, RS408, RS407, DS3611xs, , , 

, DS710+, DS509+, DS508, EDS14, RX1211, 

RX1211RP, RX4, DX1211, DX510, DX5, VS240HD and 

RAM Module (1GB/2GB/4GB/8GB). (3) “Category III 

Product” means Synology product models that apply with the 

following requirements: 12 and newer DS, DX series 

products with 5-bay and above, or 12 and newer RS, RX 

series products. (4) "Category IV Product" means all other 

Synology product models purchased by Customer after 

March 1, 2008. (5) "Category V Product" means all other 

Synology product models purchased by Customer before 

February 29, 2008.    (b) “Refurbished Product” means all 

Synology products which have been refurbished and sold 

directly by Synology through Online Store, not including 

those sold by an authorized Synology distributor or reseller. 

(c) "Customer" means the original person or entity 

purchasing the Product from Synology or an authorized 

Synology distributor or reseller. (d) "Online Store" means a 

online shop operated by Synology or Synology’s affiliate. 

(e) "Product" means a New Product or a Refurbished 

Product and any hardware incorporated into the Product by 

Synology and any accompanying documentation. 

(f) "Software" means the Synology proprietary software that 

accompanies the Product when purchased by Customer, is 

downloaded by Customer at the Web Site, or is pre-installed 

on the Product by Synology, and includes any firmware, 

associated media,  images, animations, video, audio, text 

and applets incorporated into the software or Product and 

any updates or upgrades to such software.  (g) "Warranty 

Period" means the period commencing on the date the 

Product is purchased by Customer and ending (1) five years 

after such date for Category I Products; (2) three years after 

such date for Category II & lll Products; or (3) two years after 

such date for Category IV  Products; or (4) one year after 

such date for Category V Products; or (5) 90 days after such 

date for Refurbished Products, except for those  sold as “as 

is” or with “no warranty” on Online Store. (h) "Web Site

means the Synology web site located at 

 

Section 2.  Limited Warranty and Remedies 
2.1 

Limited Warranty.

  Subject to Section 2.7, Synology 

warrants to Customer that each Product (a) will be free of 

material defects in workmanship and (b) under normal use 

will perform substantially in accordance with Synology's 

published specifications for the Product during the Warranty 

Period.  Synology warrants the Software as set forth in the 

accompanying end user license agreement provided with the 

Product, if any.  Synology provides no warranty to 

Refurbished Product sold as “as is” or with “no warranty” on 

Online Store. 

2.2 

Product Registration.  

Customers may register 

Products with Synology and may obtain the manufacturing 

date for Category I Products,  Category II  Products and 

Category III Products at the Web Site.  The failure to register 

a Product at the Web Site will not diminish the warranty 

rights set forth in Section 2.1.  Synology is not responsible 

for Customer's failure to identify the manufacturing date of 

any Product.   

2.3 

Exclusive Remedy.

  If Customer gives notice of 

noncompliance with  any of the warranties set forth in 

Section 2.1 within the applicable Warranty Period in the 

manner set forth below, then, upon verification of the 

noncompliance by Synology, Synology will, at Synology's 

option: (a) use commercially reasonable efforts to repair the 

Product, or (b) replace the noncomplying Product or part 

thereof upon return of the complete Product in accordance 

with Section 2.4  The foregoing sets forth Synology's entire 

liability and Customer's sole and exclusive remedy for any 

breach of warranty under Section 2.1 or any other defect or 

deficiency in the Product.  Customer will reasonably assist 

Synology to diagnose and validate any nonconformity with 

the Product.  The warranty set forth in Section 2.1 does not 

include: (1) any warranty relating to the Software; 

(2) physical installation or removal of the Product from 

Customer's site; (3) visits to Customer's site; (4) labor 

necessary to effect repairs or replace defective parts other 

than during Synology's or its contracted service providers' 

normal local business hours, exclusive of weekends and 

service providers’ holidays; (5) any work with any third party 

equipment or software; (6) any warranty of the hard disk if 

installed by Customer or any other third party; or (7) any 

warranty of compatibility with the hard disk. 

 

2.4 

Return.

  Any Product returned by Customer under 

Section 2.3 must be assigned a Return Merchandise 

Authorization ("RMA") number by Synology before shipment 

and must be returned in accordance with Synology's then 

current RMA procedures.  Customer may contact any 

authorized Synology distributor or reseller or Synology 

Support to obtain assistance in obtaining an RMA, and must 

provide proof of purchase and product serial number when 

asking for such assistance.  For warranty claims, Customer 

must return the complete Product to Synology in accordance 

with this Section 2.4 to be eligible for coverage under this 

Warranty.  Any Product returned without an RMA number, or 

any Product that has been disassembled (except under the 

direction of Synology) will be refused and returned to 

Customer at Customer's expense.  Any Product that has 

been assigned a RMA number must be returned in the same 

condition as it was received from Synology to the address 

designated by Synology, freight pre-paid, in packaging 

sufficient to protect the contents thereof and with the RMA 

number prominently displayed on the outside of the box.  

Customer is responsible for insurance and risk of loss with 

respect to returned items until they are properly received by 

Synology.  A Product issued a RMA number must be 

returned within fifteen (15) days after issuance of the 

applicable RMA number.  

2.5 

Replacement by Synology.

  If Synology elects to 

replace any Product under this Warranty set forth in Section 

2.1, then Synology will ship a replacement Product at 

Synology's expense via the shipping method selected by 

Synology after receipt of the nonconforming Product 

returned in accordance with Section 2.4 and validation by 

Synology that the Product does not conform to the warranty. 

In some countries, Synology may at its own discretion apply 

the Synology Replacement Service to certain Products, 

through which Synology will ship a replacement Product to 

Customer before its receipt of the nonconforming Product 

returned by Customer (“Synology Replacement Service”).  

2.6 

Support.  

During the Warranty Period, Synology will 

make available to Customer the support services. Following 

Summary of Contents for DiskStation DS415play

















Reviews: