SynJ SB67138 User Manual Download Page 33

Page: 33 / 116

2. Unplug any audio device that is connected to the

HEADSET/AUX IN

jack

from the telephone base.

3. Press

MENU/

ENTER

to start recording. After recording six seconds of silence,

your recorded audio is deleted and the display automatically returns to the
previous menu. To exit without making changes, press

EXIT

Select music on hold source

When the telephone is idle, press

MENU

/ENTER

Press or to scroll to

Base setup

. Press

MENU/

ENTER

Press or to scroll to

Music on hold

. Press

MENU/

ENTER

Press or to scroll to

M.O.H. source

. Press

MENU/

ENTER

Press or to highlight

Recorded M.O.H.

Aux In Device

If you select

Aux In Device

and the

HEADSET/AUX IN

jack is connected with an audio device, when you press

MENU/

ENTER

to save the setting,

Device connected to

the headset jack will be used for M.O.H.

displays.

-OR-

If you select

Aux In Device

and the

HEADSET/AUX IN

jack is not

connected with an audio device, when you press

MENU/

ENTER

to save the

setting,

No Device is connected to the headset jack at base

displays.

Connect an audio device to the

HEADSET/AUX IN

jack (page 24), then

choose

Review M.O.H.

The screen returns to the previous menu. To exit without making changes,
press

EXIT

NOTES:

If you unplug the audio device while a call is on hold, the music on hold source is immediately
set to

Recorded M.O.H.

The screen displays

Recorded M.O.H. reconnect. Aux In Device

reset source

If you unplug the audio device while a call is on hold, you can plug a corded headset into the

HEADSET

/AUX IN

jack and activate it by pressing

HEADSET

on the telephone base.

If you select

Aux In Device

as the music on hold source but you want to use a corded

headset, you must turn off the music on hold (see page 23) or change the source to

Recorded

M.O.H.

If you try to use a corded headset without changing the setting,

To use headset, turn

off M.O.H. or reset source.

displays with an error tone.

If you unplug your audio device from the telephone base, your music on hold source will
automatically be set to

Recorded M.O.H.

M.O.H. source
:Recorded M.O.H.

ENTER=Save

M.O.H. on/off
Review M.O.H.
Record new M.O.H.
M.O.H. source

M.O.H. source
:Aux In Device

ENTER=Save

Getting started

Telephone base setup

Summary of Contents for SB67138





















































































































Search results

Summary of Contents for SB67138

Reviews:

Related manuals for SB67138

Brands by name

Popular brands

SynJ SB67138, User Manual

Search results

Summary of Contents for SB67138

Reviews:

Related manuals for SB67138

Brands by name

Popular brands