background image

ABOUT THE PRODUCT

Synetik ErgoCare’s patented Vertiflex 60 Standing Frame is designed to provide added positioning 
assistance to the user. Supports and pad dimensions are adjusted specifically to meet the 
anthropometric measurements provided by the therapist. This growth extension can be done at time 
of delivery of the standing frame to ensure a proper fit for the user.

The Synetik ErgoCare Vertiflex 60 Standing Frame enables the user to remain upright, facilitating 
blood circulation, digestion and muscle development. In addition, the abduction option further 
reinforces a user’s lower limb capacity by reducing the risk of aggravating any hip problems which 
can be brought on by prolonged periods of sitting or lying down. Being in an upright position also 
allows the user to socialize more easily with their peers and tends to promote their physical and 
psychological development.

The Vertiflex-60 is easy to use in a variety of contexts and environments such as at home, in childcare 
settings as well as at school. The Vertiflex 60 can be used in either a prone or supine position. This 
standing frame is also available in a hybrid model, which offers both a prone and supine positioning
capability within the same product.

 

 IMPORTANT

Read the User Guide carefully before using the device for the first time and keep the Guide for future 
reference.

 

 SAFETY INSTRUCTIONS

The use of the Vertiflex 60 Standing Frame must follow the recommendation and adjustment by a  
specialized therapist.
Ensure that all accessories used are approved by Synetik as recommended.
Ensure that all persons handling the standing frame are familiar with its operation and have read 
the User Guide.
Never leave the user unattended while in the device.
Make sure all straps are securely fastened before standing the user up in the device.
Never add any weight other than that of the user to prevent the equipment from tipping.
Always lock the wheels when the device is not moving.
Make sure the standing frame is on a smooth, level surface.
Never move the equipment when the user is in it.
Never attempt to modify the product. Use only parts approved by Synetik ErgoCare otherwise the  
safety of the user may be jeopardized, and the warranty will be voided.
If unsure about the safe use of the product, stop using it and contact Customer Service.
Some parts of the standing frame may be a choking hazard for children. Always make sure that 
parts are securely fastened to the product.







Summary of Contents for Vertiflex 60













Reviews: