7
NOTE LEN
- How long the MIDI note will stay on once it is triggered.
This setting is approximately 60 ticks per second, with a special setting of 0
= infinity
STRENGTH
- A parameter to alter how much your foot power is amplified
toward the maximum velocity level when the pedal is stomped
FEEL
– Some hat pedals need a bit of ‘feel’ dialed into them in order to get
the desired trigger response. Most pedals can have this set to 0.
VELOCITY
- This is a graphic table showing the response curve for your
hat trigger velocities as determined by the following settings:
Curve
- Adjust the velocity curve to anywhere from 0 (Linear) to
various degrees of – (Exponential) or + (Logarithmic)
Max
- Set the maximum velocity of a hat trigger
Min
- Set the minimum velocity of a hat trigger
Cal Open
- Using your foot, position the pedal fully open (heel down) and
click here to calibrate
Cal Closed
- Using your foot, position the pedal fully closed (toe down) and
click here to calibrate
Input 3: EXP
If you would like to use two expression pedals with the Synapse (Input 3 and
Input 4 instead of only Input 4) there is an option to assign Input 3 as an
EXP input instead of a HAT input. Click “EXP” at the top of the column to
switch Input 3 to EXP from HAT.
CTRLR #
- The MIDI controller number the expression pedal will transmit
controller values on as it moves between open and closed
MIDI CHAN
- The MIDI channel that the MIDI controller values will be
transmitted on
CURVE
- Choose an output curve for the controller value output