background image

   

13   

- Enter Raw Mode and move your expression pedal from fully open (heel 
down) to fully closed (toe down) and notice the number changing in the 
indicator box next to "Input 4" in the Settings program 
 
- Turn the trimmer slowly clockwise as you rock the pedal back and forth 
from fully open to fully closed until you find the trimmer position where you 
are getting the largest range of numbers in the indicator box as the pedal 
swings its full range 
 
- Exit Raw Mode 
 
- Position your pedal fully open (heel down) and click the "Cal Open" button 
at the bottom of the Input 4: EXP column 
 
- Position your pedal fully closed (toe down) and click the "Cal Closed" 
button at the bottom of the Input 4: EXP column 
 
- Look at the MIDI Meter (in the upper right of the program) to see your 
MIDI controller output successfully cover the full MIDI range from 0 to 127 
as you rock your pedal from open to closed 
 
- Finish by configuring the other parameters in the Input 4: EXP column to 
your liking 
 
 
 

SYNAPSE TOOLS 

 
 

RAW MODE

 - This makes two indicator boxes appear (next to Input 3 and 

Input 4) which show raw data values streaming from your Input 3 and Input 
4 pedals.  Raw Mode can help while setting the trimmers on the bottom of 
the Synapse to get maximum dynamic range from your particular pedals. 
[See above 

“Calibrating Synapse to Your Pedals”

 

ENTER BOOTLOAD

 - Only press here if Synesthesia Corp. has contacted 

you regarding a firmware update.  Pressing here will drop communication 
with your Synapse and enter it into ready mode to receive a firmware 
update.  If you press here accidentally you will need to quit the program and 

Summary of Contents for Mandala Synapse















Reviews: