2
Operation Guide
Hand Held Remote Control
For battery replacement and installation on wall, back cover has to be removed.
For the battery replacement, check the polarity of 12V 23A battery and insert into correct connection plate.
There is key chain hole for user, if applicable.
There are two button for control and LED for indication.
CONCAVE
shape button for OFF function.
CONVEX
shape button for ON function.
When either button pressed, LED is flash as indication of wireless transmission.
Receiver Unit
Plug the extended power cord plug into desired wall socket.
Then it is ready to receive the control signal form Hand Held Remote Control.
Press “ON” button on Hand Held Remote Control, there is electricity in socket outlet.
Press “OFF” button on Hand Held Remote Control, the electricity in socket outlet is OFF.
For temporary mounting on wall, there is a hanger hole on the back of unit.
The MAX. operation range is about 30 meter (line of sight)
Operation Precautions :
DO NOT drop or shake the unit or subject the unit to shock.
DO NOT clean the unit with benzene, thinners, or any solvents. Wipe off dust and marks with a soft cloth
which is slightly moistened in mild soapy water.
Installation Precautions :
Before installing this product, please bear in mind of the following:
DO NOT position the units where they will be subjected to extreme moisture, temperature, rust or dust.
DO NOT install the Receiver Unit to where it will be exposed to direct sunlight, rain or extreme moisture. A
closed-in porch or sheltered area is an ideal location.
DO NOT install near to other electronic equipment.
DO NOT overload the socket outlet.
DO NOT install near the source of acid oxides, ammonia, or any harmful gas.
Keep away from children access.
Warning :
-To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions.
-Under the environment with radio frequency interference, the sample may malfunction and require user to
reset the sample.
