background image

 

 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

 

Video door phone 

Installation and operation manual 

(Model:

 

HD-2192 ) 

Introduction 

Thank you for purchasing this SynerTech product.   

This Video door phone System is an easy-to-use and DIY installed video interphone system. 

To obtain the best performance from this product, please read through this manual carefully. It 

will guide you to operate a full set of HD-2192

 

and how to connect with out door camera and 

the electronic door lock.

 

A. Name of parts, accessories and indicators for full set of VDP (HD-2192) 

 

Indoor unit (Fig.1)

 

Outdoor unit (Fig.2)

 

Accessories (Included)

 

1.  Monitor screen 
2. 

“TALK

button 

3. 

“Monitor off

button 

4.  Integral microphone   
5. 

“Door Open“ button 

6. 

“Monitor on “ button   

7.  Wire terminal   
8.  DC socket   
9.  Wall mounting hole 
10. Integral speaker 
11. Label 
12.Volume adjust hole; 
 
 
 

 

 

a. Aluminum camera 

case; 

b. Integral speaker 
c. Camera fixing screw 

and cover 

d. Integral microphone 
e. “Call” button 
 
   
 

I.    Phone set wall 

mounting hole DIM 

II.  Camera set wall 

mounting housing 

(See fig.3) 

III.  Communicating 

cables (10 meter) 

IV.

  Adaptor (See fig.5)

 

V.

 

Screws

 

 

 

 

 

 

 

 

 

 

Summary of Contents for HD-2192







Reviews: