SYNERGY UW CUTTING /WELDING SAFETY ISOLATION SWITCH # SY-BRUW-CWS
The chart shown below provides details of the thermal testing undertaken by Albright . The graph show
details of the temperature gradients involved during testing. The unit was subjected to a continuous 135
minutes testing period at 250 amps DC and shows the moving contact stabilized at 152.8 degrees C. The
voltage drop across the unit was 397mV and the switch performed satisfactorily during the test.
Enclosure are available in three models; large and small steel and a utility case.
Material: Steel HPX resin
Type: Portable
Body Colour: Olive
Wall Thickness: 1.2mm
IP Rating: IP67
Supplementary Information:
Details with regards to the safe use of electricity underwater may be obtained from the code of practice D045,
published by IMCA. It is highly recommended that all persons involved with using electricity underwater be familiar
with this document.
Summary of Contents for SY-BRUW-CWS
Page 7: ...SYNERGY INFRASTRUCTURE...
