LCD1U15-17 LCD KVM console integrates
- 4 -
1 Introduction
1.1 Overview
keyboard, Widescreen LCD display and
touch pad in a drawer type worktable and provides a convenient space-saving operation
mode for KVM switch technology. The cover is an widescreen LCD display, while the base
is keyboard and touchpad. Metal Buckles on the left and right are moved aside to open the
cover. It can be operated once the KVM module is pulled out. Once the operation is
completed, push the KVM module back to the rack.
LCD1U15-17 LCD console is a control device integrating 15.6” widescreen LCD. ,86-
key keyboard and touchpad mouse. You can access multiple hosts using the LCD console
while saving money and efforts.
LCD KVM console is the best choice to save time and efforts. Since all hosts can be
controlled from a single main control terminal, using the widescreen LCD KVM
Console:(1)avoids the cost of keyboard, mouse and monitor of each host; (2) saves work
space; (3) saves power; (4) saves the trouble of moving from one computer to another.
* For Mac and Sun hosts, USB cable must be used for connection.
1.2 Function
&
Features
KVM-1501WS LCD KVM display is integrated to a drawer type worktable of 1U height to
facilitate rack installation. Supported resolution
up to 1366 x 768, 75Hz. It meets the 1U
height of rack specifications and can be installed into19 inch rack cabinet . No need to
install additional software or hardware.
1.3 Hardware Requirement
1.3.1 Hosts Requirement:
(1) VGA, SVGA or Multisync card
Note: the max. resolution of the integrated widescreen LCD display is 1366x768. Make
sure the resolution of any connected computer does note exceed this resolution.
(2) PS/2 or USB keyboard and mouse port.
1.3.2 Cables
The switch can be connected to hosts using PS/2 or USB connector depending on the
different KVM cable
.
